|
High Efficiency WPC Extrusion Line / Extrusion Machine , Profile Width Max 240mm
Detailed Product Description
WPC profile production line for decking,fence,outdoor use profile with CE certificate
Description:
With special designed screw ,barrel, mould and production process
,equipped with series downstream equipment ,this can produce PE
/PP/ PVC and wood-plastic composite profiles.This is a new kind of
environmental friendly building material. WPC profiles is produced
by mixing the plastic ,wood powder ,foam agent and other additives,
after high temperature and high pressure ,the products can be used
for pallets ,packing plates ,windows and door frames ,decoration
panels etc.
Feature:
1.High quality; unique design; excellent manufacture;
2.Reasonable feeding technology; feed plastic and wood power(after
treated) separately and correctly with avoid layering phenomenon
and mass defect, because of different ratio of plastic and wood
power.
3. High efficiency: Good mixing and plastering effect, fine
liquidity and quickly, high efficiency.
4. Low efficiency consumption: no need of drying granulation
obviously can save energy.
Features of Finished Product:
The new plastic-wood composite is similar to wood in look, feeling
and smell, but with better performance than wood.
2.Resistant to water, insects, corrosion and mildew.
3.Ideal for applications in high moisture environments.
4.Lightweight and durable.
5.Superior dimensional stability.
6.Recyclable to meet environmental protection requirements.
7.No surface finishing is required.
8.Same processing methods as for plastic. Suitable for mass
production.
Equipment advantages:
1. The parallel twin screw extruder is used to mix the wood and
plastic, and get good homogeneous melt
2. It uses single screw extruder as the second stage to build the
pressure to extrude the final product
3. It adopts both advantages of single screw extruder and parallel
twin screw extruder
4. Wood fiber can be 65% in the WPC products due to the good mixing
effect, so the cost of WPC product is low
5.Four-step vacuum exhaust to get good exhausting and dehumidifying
effect
6. If the natural moisture is less than 10%, the dryer is not
needed
7. It saves investment and energy
8. The material and screw are made from special alloy, so the
service life is longer than other equipment
9. This is one step WPC extrusion technology, which saves energy
10. The parallel twin screw extruder is of building block
structure, so it can produce variety of plastic through adjusting
the screw
Main technical information:
Model | WR-180 | WR-240 | WR-300 |
Profile Max Width | 180mm | 240mm | 300mm |
Extruder Model | SJSZ-51/105 | SJSZ-55/110 | SJSZ-65/132 |
Vacuum Table Length | 4000mm | 6000mm | 6000mm |
Output(max) | 150kg/hour | 250kg/hour | 300kg/hour |
![]() |
High Efficiency WPC Extrusion Line / Extrusion Machine , Profile Width Max 240mm Images |